最大流速 | 2.4lpm |
Max Head | 80M. |
進口/出口 | 3/8“ |
Solids Size | 10mm |
最大流速 | 2.4lpm |
Max Head | 80M. |
進口/出口 | 3/8“ |
Solids Size | 10mm |
The Boyser AMP-10/B Series蠕動泵是我們的軟管泵係列中最小的,具有較低的輸給量和小體積轉移應用的流速。雖然尺寸緊湊,但這種自動噴漆蠕動泵是重型的,並且能夠在其他泵由於幹式運行,堵塞閥門和密封故障而失效的環境中執行的。
One of the largest benefits of the peristaltic hose pump design is that the hose is the only wearing part, which is easy to clean and replace, making it simple and low cost to maintain relative to other pumping technologies. Thanks to its internal hose being available in a variety of materials, its ability to handle solids, viscous fluids with little moisture and shear sensitive mediums these男孩泵是非常多才多藝的。適用於適用於油性汙泥,艙底水,油,剪切敏感液體的各種應用,具有固體的漿料,脫水,罐排水,急救泵泄漏,食品,酸,石灰牛奶和泥漿。
Boyser AMP是一個滾筒操作的蠕動軟管泵,而不是作為鞋子操作。由於這種設計產生了較少的摩擦,用戶可以從較低的功耗中受益,這是一個較低的起始扭矩,其提供更平滑的操作,並更容易調整速度,並且還更容易,因為它不需要潤滑。
內聯脈動阻尼器 | Ensures a continuous, smooth flow for the accurate use of flow meters and pressure switches. By eliminating vibrations and hammering, operation is relatively quiet and working life is increased. |
Hose Leakage Sensor | 如果泵的唯一佩戴部分(軟管)失敗,傳感器可以關閉泵或激活警報以允許快速解決情況。這使得泵適用於遠程安裝或處理危險流體的地方。 |
Halar (ECTFE) Coating | Improves the corrosion resistance of the pump in chemical or other hazardous applications. |
PP / PDV連接 | As standard, connections are Stainless Steel, but for chemical applications they can be supplied in alternative materials. |
Integrated Control Panel | 可以根據用戶要求配置,具有開/關,速度控製,反轉開關,流量和壓力顯示,泄漏警告。 |
Trolley or Base Plate | For the flexibility of installation and enhanced mobility where required. |
逆變器 | Pump speed can be slowed down to the required flow, extending the life span of the motor by not making is unnecessarily work to full capacity, and reducing wasted energy costs. |
批處理係統 | Allows a predefined quantity of fluid to be input, and then stops the pump once the pre-set amount has been dosed. |
The Boyser AMP Series Peristaltic Tube Pumps are available with the following material options:
nr&nr-a | nbr&nvr-a | epdm. | Santoprene. | 諾勒琳 | Tygon | hypalon. | |
Hose | X | X | X | X | X | X | X |
Castle Pumps' experience in the pump market means that the customer is always advised on the ideal type of pump for their application. In this example where a saline solution needed to be transferred slowly, Castle Pumps knew that a peristaltic pump was a perfect fit due to its low flow rate and the fact that the only wetted part that needs to be compatible with the solution was the hose.
Bosyer AMP Peristallic泵是通常,其他泵浦技術失敗的應用的理想解決方案。以下優點使蠕動泵成為重型部位應用,各種化學品和工藝液體和磨蝕性和粘性漿料。
蠕動的軟管泵能夠處理高度viscous, dry and solid laden mediums with no damage, making them a popular choice for harsh and abrasive applications. In addition, the wide variety of materials that the inner tube is available in, along with the peristaltic hose pump’s seal-less design, means that even the most of aggressive fluids and chemicals can be handled. This makes the AMP peristaltic pump ideal for applications including:
海洋應用 | 工業的應用程序 |
|
|
Castle Pumps are fully accredited to enable you to buy with confidence. Our accreditation includes: