貓泵是全球知名品牌，提供一係列工業職責，高強度，三重活塞泵，專為困難，高壓應用而設計。實際上，它們的壓力能力超過了大多數其他泵類型。CAT 623泵是10幀模型，壓力較高但流量低於貓820 10幀。

利用摻入泵的同步活塞，貓活塞泵由於流體在一個，平滑向前移動而產生穩定的低脈動流量。它由貓泵的運行速度決定，並且通常通過這種比重，背部壓力或流體粘度的問題而滅絕。這種穩定的流動使能實現triplex piston pump對於大多數應用程序，必須順利和有效地操作。

By taking in a fixed volume of liquid, the high pressure piston pump ensures that a constant volumetric flow is always delivered. This is attributed to the inlet stroke on the piston moving the set amount of liquid around and out of the pump.

The primary uses of CAT triplex pumps include water mist cooling, chemical injection, pressure cleaning, reverse osmosis and food processing, where high pressure is a feature of the application. CAT pumps are available as standard in brass and 304 stainless steel depending upon customer requirements, as well as with a variety of seal materials including Viton, EDPM, PTFE and NBR, making them compatible with a range of fluids.

貓活塞泵的特點：

• 10幀三玻璃活塞泵，能夠實現恒定的高壓，無論不同的流量如何
• 型號貓623 - 黃銅結構，型號貓621 - 304不鏽鋼
• Dependable output - discharge pressure, specific gravity and liquid viscosity have no effect upon the flow rate.
• 相對於流速的速度 - 隨著泵輸出直接線性的操作速度，性能可以簡單地控製和預測可以簡單
• Resilient drive ends – CAT pumps are produced to the highest quality with close consistent tolerance, the crankshafts, crossheads and connecting rods are optimised to minimise wear.
• 沒有磨料表麵 - 活塞泵不依賴於流體的潤滑性質，因為泵頭內的接觸表麵之間沒有相對運動。
• Solid ceramic plungers - to make sure that the seals are aligned correctly when seals are replaced, smooth solid plungers made from alumina ceramics are located concentrically
• 由於泵頭和油浴之間的顯著間隙，沒有內液混合 - 潤滑劑和工藝液體的內部混合。液體的任何溢出都很清楚，因為貓活塞泵下方有一個排水區域。
• 高效 - 最小的內部滑動和低摩擦確保能量效率水平在85％和95％之間，因此運行成本較低。
• 連續義務
• 可用的裸軸，電動發動機驅動
• ATEX certification available

• 型號623 - 10架活塞泵 - 實心軸，黃銅，22.7LPM，83BAR
• 型號621 - 10架框架活塞泵 - 實心軸，不鏽鋼，22.7LPM，83BAR

• CAT 623/621 10框架高壓三重活塞泵 - 數據表

澆灌室淨水 - 帶驅動柱塞泵

乐动体育平台城堡泵在需要時自定義和工程泵送解決方案，以確保它們完全符合客戶的定製要求。在這種情況下，我們將準備好使用泵，電機，皮帶驅動器，鋼板和鋼基底采用滑動安裝泵係統，以滿足其對高壓，低流量溶液的要求。

三缸活塞泵泵送技術挑戰ned by their high pressure capabilities, which exceed most other pump types. However they are not designed for fluids with suspended solids as they can become trapped in the valves, therefore CAT piston pumps are primarily designed for high pressure applications involving relatively clean fluids, free of from solids or abrasive particles. These include but are not limited to: